Unable to move oilt1.zip: Full Path Required

[sgmoore]

Hi Stephen,

Thank you for reporting the problem. Do you know what FTP server software was running on the two servers you were transferring between?

File was coming from a Windows 2003 server running Microsoft FTP Service and being moved to a ftp server on hostgator which has the welcome message
Welcome to Pure-FTPd [TLS]

I have included some of the (hopefully relevant) log file below.

30/09/2008 19:10:06 Recv> 220 Microsoft FTP Service

30/09/2008 19:10:06 Sent> FEAT
30/09/2008 19:10:06 Recv> 211-FEAT
30/09/2008 19:10:06 SIZE
30/09/2008 19:10:06 MDTM
30/09/2008 19:10:06 211 END
30/09/2008 19:10:06 Sent> TYPE A
30/09/2008 19:10:06 Recv> 200 Type set to A.
30/09/2008 19:10:06 Sent> SYST
30/09/2008 19:10:06 Recv> 215 Windows_NT


30/09/2008 19:10:06 Recv> 220---------- Welcome to Pure-FTPd [TLS] ----------

30/09/2008 19:10:07 Sent> FEAT
30/09/2008 19:10:07 Recv> 211-Extensions supported:
30/09/2008 19:10:07 EPRT
30/09/2008 19:10:07 IDLE
30/09/2008 19:10:07 MDTM
30/09/2008 19:10:07 SIZE
30/09/2008 19:10:07 REST STREAM
30/09/2008 19:10:07 MLST type*;size*;sizd*;modify*;UNIX.mode*;UNIX.uid*;UNI X.gid*;unique*;
30/09/2008 19:10:07 MLSD
30/09/2008 19:10:07 ESTP
30/09/2008 19:10:07 PASV
30/09/2008 19:10:07 EPSV
30/09/2008 19:10:07 SPSV
30/09/2008 19:10:07 ESTA
30/09/2008 19:10:07 AUTH TLS
30/09/2008 19:10:07 PBSZ
30/09/2008 19:10:07 PROT
30/09/2008 19:10:07 211 End.
30/09/2008 19:10:07 Sent> TYPE I
30/09/2008 19:10:07 Recv> 200 TYPE is now 8-bit binary
30/09/2008 19:10:07 Sent> SYST
30/09/2008 19:10:07 Recv> 215 UNIX Type: L8


I am using Version 3.07 (build 9037) of BC

Hope this helps.

[Chris]

Hi Stephen,

Thank you for reporting the problem. Do you know what FTP server software was running on the two servers you were transferring between?

[sgmoore]

F.Y.I.

Had occasion to move two rather large files from one ftp server to another. I did each one separately and at the end of each transfer I got an error message similar to the title. Had no problems deleting the files after the error message. When I tried this on a small text file it worked without any error messages, so it may be related to the size of the files (both over 200 Megs) or a timeout / disconnect issue.

Also, the first attempt to move one of the these files had to be aborted and when I repeated the procedure, BC resumed from where it had left off and the percentage bar started from around 40% complete and worked flawlessly. However when I went to transfer the second file, the percentage bar must have started at the same position (around 40%). (For a brief moment I thought my Broadband speed have got a thousand times faster, but unfortunately not-).
I wasn't able to watch the progress, so I don't know whether how the percentage bar behaved afterwards, but in the end it was only a visual glitch as the complete file was transferred correctly.


Stephen